EasyManuals Logo

Yealink SIP-T53W Administrator's Guide

Yealink SIP-T53W
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #531 background imageLoading...
Page #531 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
528
Values 1-Enabled
Default
0
Parameter
account.X.custom_ua
[1]
<MAC>.cfg
Description
It configures the suffix of User-Agent in SIP request messages from the phone.
Permitted
Values
String within 256 characters
Default
Blank
Parameter
account.X.call_id_mode
[1]
<MAC>.cfg
Description
It configures the constitution of caller ID.
Permitted
Values
0-Use random digits
1Use the combination of the digits and letters
2Use random digits plus MAC address
Default
0
Parameter
account.X.path.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the Supported:path header in the REGISTER request mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.insert_outbound_in_route.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to add outbound server address as the topmost Route header in the
request message.
Note: It works only if the received 200 OK response for the REGISTER request contains the Service
route header.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.invite_with_rpid_header.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to add the Remote-Party-ID (RPID) header in the initial INVITE mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
account.X.third_part_request_with_route.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the Route header in the request message which is sent to
the third-party server (for example, a Music On Hold server).
Note: It works only if the received 200 OK response for the REGISTER request contains the Service
route header.
Permitted
0-Disabled

Table of Contents

Other manuals for Yealink SIP-T53W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T53W and is the answer not in the manual?

Yealink SIP-T53W Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP mobile phone
Product colorGray
Keypad illuminationYes
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Security algorithmsAES, HTTPS, SIPS
Networking standardsIEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Lines quantity8 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.3 W
Volume controlButtons
Number of programmable keys8
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Number of DECT wireless handsets4
Voice codecsG.722, G.723.1, G.726, G.729A, G.729B, OPUS, iLBC
Weight and Dimensions IconWeight and Dimensions
Depth210.6 mm
Width212 mm
Height174.5 mm

Related product manuals