Getting Started
33
For SIP-T27G:
Note
For SIP-T23P/T23G/T21(P) E2:
For SIP-T19(P) E2:
Connecting the Power and Network
AC Power (Optional)
To connect the AC power and network:
1) Connect the DC plug of the power adapter to the DC port on the IP phone and connect
the other end of the power adapter into an electrical power outlet.
2) Connect the included or a standard Ethernet cable between the Internet port on the IP
Wireless headset adapter EHS36 should be purchased separately. For more information on how
to use the EHS36 on the IP phone, refer to
Yealink EHS36 User Guide.
The EXT port on SIP-T48G/T48S/T46G/T46S IP phones can also be used to connect the
expansion module EXP40. The EXT port on SIP-T29G/T27P/T27G IP phones can also be used to
connect the expansion module EXP20. For more information on how to connect the
EXP40/EXP20, refer to
Yealink EXP-specific user guide
.
To Next Page
Loading...
