Yealink SIP-T54S - Page 636

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
610
Parameters
Permitted Values
Default
Description:
Configures the event of the BLF subscription for account X.
0-dialog
1-presence
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It is not applicable to SIP-T19(P) E2/CP860/CP920 IP phones.
Web User Interface:
None
Phone User Interface:
None
account.X.out_dialog_blf_enable
0 or 1
0
Description:
Enables or disables the IP phone to handle NOTIFY messages out of the BLF dialog for
account X.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It is not applicable to SIP-T19(P) E2/CP860/CP920 IP phones.
Web User Interface:
Account->Advanced->Out Dialog BLF
Phone User Interface:
None
To configure BLF subscription via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.