Yealink SIP-T54S - Page 848

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
822
Web User Interface
Upload the custom ring tones.
Configure a ring tone for the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet?p=setti
ngs-preference&q=load
Configure a ring tone on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=acco
unt-basic&q=load&acc=0
Phone User Interface
Configure a ring tone for the IP phone.
Configure a ring tone for the account.
Details of the Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.ring_type
Refer to the following
content
Ring1.wav
Description:
Configures a ring tone for the IP phone.
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
phone_setting.ring_type = Ring1.wav
Web User Interface:
Settings->Preference->Ring Type
Phone User Interface:
Menu->Basic->Sound->Ring Tones->Common
account.X.ringtone.ring_type
Refer to the following
content
Common
Description:
Configures a ring tone for account X.
Permitted Values:
Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav,
Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example: