Yealink SIP-T54S - Page 97

Setting Up Your System
71
networks. All the available wireless networks will display in scanning list on the LCD screen. You
can store up to 5 frequently-used wireless networks on your phone and specify the priority for
them.
Note
Procedure
Wi-Fi feature can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.
cfg
Configure Wi-Fi feature.
Parameter:
static.wifi.enable
Configure the Wi-Fi settings.
Parameters:
static.wifi.X.label
static.wifi.X.ssid
static.wifi.X.priority
static.wifi.X.security_mode
static.wifi.X.cipher_type
static.wifi.X.password
Web User Interface
Configure Wi-Fi feature.
Configure the Wi-Fi settings.
Navigate to:
http://<phoneIPAddress>/servlet?p=netw
ork-wifi&q=load
Phone User Interface
Configure Wi-Fi feature.
Configure the Wi-Fi settings.
Details of the Configuration Parameters:
Parameters
Permitted Values
Default
static.wifi.enable
0 or 1
0
Description:
Enables or disables the Wi-Fi feature.
To use Wi-Fi feature on SIP-T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G IP phones,, make
sure the Wi-Fi USB dongle is properly connected to the USB port on the back of the phone (It is
not applicable to CP920).
When you connect the Ethernet cable, you can enable the Wi-Fi feature. But you have to disable
the Wi-Fi feature if you want to use the wired network.