EasyManuals Logo

Yealink SIP-T58A Getting Started

Yealink SIP-T58A
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Recovery Mode on Yealink IP phones
15
Procedures
1. Long press (Speakerphone key) and reconnect the power adapter to trigger the recovery
mode. Do not release until the recovery mode selection screen appears on the phone LCD
screen.
Note
2. Press 2 on the phone keypad to use USB flash drive.
The IP phone will read and upgrade the firmware from the USB flash drive.
After upgrading, the IP phone will initialize successfully and get ready for use. The LCD screen
prompts “Initializing…Please wait” when upgrading successfully.
3. If the IP phone fails to upgrade, the LCD screen will indicate the failure. You need to check and make
sure:
The file system of the USB flash drive should be FAT32.
The USB flash drive has been successfully connected to the IP phone.
The resource files are correctly renamed and placed on the USB flash drive.
Repeat the recovery mode procedures to try again.
The LCD screen prompts Update failed (-1) when failing to upgrade:
4. Press to verify the current firmware version after upgrading successfully.
Note
. Update failed (-1) .
For CP920, you need to long press the specified soft key (the second from the left on the phone)
since there is no Speakerphone key.
Press 1 to use the TFTP server. For more information on recovery mode using the TFTP server,
refer to For SIP Phone Series.
Welcome
.... InitializingPlease wait .
You need to tap Settings->Status (for VP59/SIP-T58A IP phones) or tap Menu->Settings (for
SIP-T57W IP phones) to verify the current firmware version since there is no key.
1. TFTP
2: USB

Other manuals for Yealink SIP-T58A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T58A and is the answer not in the manual?

Yealink SIP-T58A Specifications

General IconGeneral
Touchscreen typeCapacitive
Display resolution1024 x 600 pixels
Operating system version5.1.1
Operating system installedAndroid
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
BluetoothNo
Security algorithmsSRTP
Networking standardsIEEE 802.1x
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity2
Voice codecsG.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Front camera resolution (numeric)2 MP
Base station keys27
AC adapter input voltage100 - 240 V
AC adapter output current2 A
Power consumption (typical)1.9 W
Operating temperature (T-T)-10 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth220 mm
Width259.4 mm
Height239 mm
Package depth293 mm
Package width324 mm
Package height128 mm

Related product manuals