Yealink SIP-T58A Quick Reference Guide

TRANSFER CALLS
Blind transfer
Press the button or Tra ns fe r soft key during an active call. The call is automati-
cally placed on hold.
Enter the number to which you want to transfer the call.
To complete the transfer either hang up, or press the button, or press the
Tra nsfer soft key twice.
Consultative transfer
Press the button or Tra ns fe r soft key during an active call.
The call is automatically placed on hold.
Place a call to the transfer recipient by entering their number
then waiting for the call to complete or pressing the Tran sfer
soft key followed by Send.
When the transfer recipient answers, if they are
available to take the call, press the button or
Tra nsfer soft key to complete the transfer.
Direct to voicemail transfer
Press the button or Tra ns fe r soft
key during an active call. The call is
automatically placed on hold.
If you are transferring to a four-digit extension, enter *90 followed by the number to
which you want to transfer the call.
If you are transferring to a five-digit or six-digit extension, enter * followed by the
number to which you want to transfer the call.
To complete the transfer either hang up, or press the button, or press the
Tra nsfer soft key twice.
Return to the original caller
At any point before completing a transfer, you may take the original caller off hold
by tapping the line soft key controlling the held call or tapping the held call window
and tapping Resume.
MAKE A 3-PARTY CONFERENCE CALL
Tap the Conference soft key during an active call.
The active call is automatically placed on hold.
Enter the number of the party you would like to
conference in, then tap Conference or wait for the
call to complete.
When the third party answers, press the Conference
soft key again. All parties are now joined in the
conference.
Press the Split soft key to split the conference call into
two individual calls.
Press the EndCall soft key to disconnect all parties
or to leave a three-way conference.
To disconnect all parties in a three-way conference,
Split into individual calls, then EndCall each party.
MUTE AND UNMUTE MICROPHONE
Press  to mute the microphone during a call.
Press  again to unmute the microphone during a call.
For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice
Quick Reference Guide
Yealink SIP-T58A and T58V

Yealink SIP-T58A Specifications

General

Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Operating system version	5.1.1
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Bluetooth	No
Security algorithms	SRTP
Networking standards	IEEE 802.1x
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity	2
Voice codecs	G.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Front camera resolution (numeric)	2 MP
Base station keys	27
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
Power consumption (typical)	1.9 W
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	239 mm
Package depth	293 mm
Package width	324 mm
Package height	128 mm