Yealink T29G Configuring Guide

About This Guide
v
About This Guide
Thank you for choosing the Yealink SIP IP phones. The purpose of this guide introduces how to
configure Yealink SIP IP phones via CommPortal phone configurator.
The configuration process outlined in this guide applies to the following phone models:
Phone Model
Firmware
T19P-E2
53.80.202.1 or later
T40P
54.80.202.1 or later
T27G, T29G, T40G, T41S, T42S, T46S, T48S
X.82.0.1 or later
T54S/T52S
70.82.0.10 or later
W60B
77.81.0.16 or later
CP920
78.81.0.15 or later
T58A/T58V/T56A
58.83.0.15 or later
CP960
73.83.0.25 or later
T57W/T54W/T53W/T53
X.84.0.65 or later
W80B
103.83.0.55 or later
Note
The configuration process described in this guide takes the Yealink SIP-T42S IP phone as an
example.
In This Guide
Topics provided in this guide include:
 Chapter 1 Configuration Methods
 Chapter 2 Customizing Your Phone
 Chapter 3 Downloading Configuration Files to Phones
 Chapter 4 Basic Call Features
 Chapter 5 Advanced Phone Features
 Chapter 6 Troubleshooting

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)