Yealink T29G Quick Start Guide

SkyTalk Plus Yealink T29G Quick-Start Guide
The purpose of this Quick-Start Guide is to show users how to
use the basic call features available on the Yealink T29G Phone.
For additional information on Yealink phones, email
support@skytalkplus.com or visit www.yealink.com.
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key
Using the headset:
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then press the Send soft key.
Basic Call Features
1
Note: During a call, you can
alternate between the headset,
hands-free-speaker phone, and
handset modes by pressing the
Headset key, the Speaker phone
key, or by picking up the handset.
Headset mode requires a
connected headset.
Yealink T29G Controls
and Features Layout
Return to Contents Cover Page

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)