Yealink T33G Guide

Note: The IP phone should be used with Yealink original power adapter (5V/2A)only. The use of the third-party
power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend
that you use the Ethernet cable provided by Yealink. If inline power (PoE) is provided, you don’t need to connect
the power adapter. Make sure the hub/switch is PoE-compliant.
After the phone is connected to the network and supplied with power, it
automatically begins the initialization process. After startup, the phone is
ready for use.
3. Connect the network and power
You have two options for network and power connections. NetCarrier will advise you which one to
use.
Initializing... Please wait
Welcome
Starting the Phone

Yealink T33G Specifications

General

Resolution	320x240 pixels
Network	10/100 Mbps Ethernet
PoE	Yes
SIP Accounts	4
Wall Mountable	Yes
Opus Codec	Yes
Audio Features	HD Voice, full-duplex speakerphone with AEC
Headset Support	Yes, RJ9
Local Phonebook	1000 entries
Display	2.4-inch 320x240-pixel color display