Yealink T53W Guide

Note: The USB port can also be used to connect other USB devices, such as EXP50, USB headset and so on.
Note: The IP phone should be used with Yealink original power adapter (5V/2A)only. The use of the third-party
power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend
that you use the Ethernet cable provided by Yealink. If inline
power (PoE) is provided, you don’t need to connect
the power adapter. Make sure the hub/switch is PoE-compliant.
3. Optional: Connect the USB devices
After the phone is connected to the network and supplied with power, it
automatically begins the initialization process. After startup, the phone is
ready for use.
4. Connect the network and power
You have two options for network and power connections. NetCarrier will advise you which one to
use.
Initializing... Please wait
A
AC Power Option
PC Connection
(Optional)
B
PoE ( Power over
Ethernet ) Option
PC Connection
(Optional)
Power Adapter
(DC 5V)
IEEE 802.3af
compliant PoE
Hub/Switch
PC
PC
Welcome
Starting the Phone

Yealink T53W Specifications

General

SIP Accounts	12 SIP accounts
Opus Codec	Yes
Resolution	360 x 160 pixels
Bluetooth	Yes
Wi-Fi	Yes
USB Ports	1 x USB 2.0
Ethernet Ports	2
PoE	Yes (IEEE 802.3af Class 2)
Audio Features	HD Voice, Full-duplex speakerphone
Expansion Module Support	Supports up to 3 EXP50 expansion modules
Headset Port	RJ9