Yealink T58A

Quick Reference Guide - Yealink – T58A IP Phone with Camera
2
Yealink T58A IP Phone with Camera
CALL WAITING
It is possible to make multiple calls, however, only
one active call can be in progress at any time, other
calls are placed on hold.
To make a new call during an active call:
 Press on the phone or tap the Hold soft key
(to place the original call on hold)
 Tap the New Call soft key
 Enter the desired number using the keypad or
on-screen keypad
 Tap OK or the Send soft key
Note: To switch between calls, tap the call that is
on hold then tap Resume
To answer a new call during an active call:
 Tap the Answer soft key or
 Tap the incoming call avatar, then tap Answer
Muting a Call
While on a call it is possible to place the call on
mute, this prevents the caller from hearing you, but
you can still hear the caller.
To mute a call:
 Press during an active call
 Press again to un-mute the call
 The mute key illuminates solid red when the call
is on mute
TRANSFERRING CALLS
There are two ways of transferring a call – Blind
transfer and Consult transfer
Blind Transfer allows you to transfer a call directly
to another without announcing the call first:
 During a call press the Transfer button on
the phone or tap the Transfer soft key
 Enter the number you want to transfer the call to
 Press on the phone or tap the Transfer
soft key to complete the transfer
Consult Transfer allows you to transfer a call to
another party with announcing the call first:
 During a call press the Transfer button on
the phone or tap the Transfer soft key (this
places the caller on hold)
 Dial the number you want to transfer the call to
 When the party answers, announce the call
 Press on the phone or tap the Transfer
soft key to complete the transfer
If the party refuses the call prior to completing
the transfer:
 Tap the Cancel soft key then tap Resume to go
back to the original caller
CONFERENCE CALLS
You can create up to a three-way video conference
call and a five-way audio-only conference:
 While on an active call, tap the Conference soft
key (The active call is placed on hold)
 Enter the number of the second party, then
press , or tap Conference
 When the second party answers the call, tap the
Conference soft key on the second party call
screen to join all parties in the conference
 Repeat steps 2 to 4 until you have added all
intended parties
Note: The phone will enter the video call full screen
within 5 seconds during a call; tap the blank area of
the touch screen to access the soft keys