Yealink T58A

PLACING + ANSWERING CALLS
PLACE AN INTERCOM CALL (within your Business Group)
Automatically bypasses ringing and opens the speaker of the party you are calling.
+ Tap INTERCOM Key. (Appears on first idle screen).
+ Enter intercom (extension) number.
+ Lift Handset or tap AUDIO CALL or VIDEO CALL from the display.
+ Party will hear warning tone and their speaker is open for you to speak or announce.
+ For privacy, their microphone is automatically muted (they must unmute to speak).
+ If the called party is on another call, their phone will ring.
ANSWER AN AUDIO CALL
+ Phone rings, indicator flashes, available commands
appear on the display.
+ Lift Handset or press SPEAKER Key or tap ANSWER.
+ TO QUIET A RINGING CALL: Tap SILENCE.
+ TO SEND RINGING CALL TO VOICEMAIL: Tap REJECT.
+ TO FORWARD TO ANOTHER SUBSCRIBER: Tap FORWARD, enter the extension
number and tap FORWARD again.
8
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative
PLACE A CALL
+ Internal: Enter the extension number
+ External: Enter 1 and the 10-digit number
+ Lift Handset or tap AUDIO CALL or VIDEO CALL on the display.
Or press the SPEAKER Key.
NOTE: Video calls can only be made to others in your business group
with a T58A with camera.
ANSWER A VIDEO CALL
+ Phone rings, indicator flashes, available commands appear on the display.
+ Tap ANSWER.
A screen appears to tell you sender wants to
switch to a video call.
+ Tap ACCEPT to accept the video call.
+ Tap IGNORE to leave the call as audio
only.