Packing List
Assembling the Phone
Handset
Handset Cord
Assembling the Phone:
The phone can also share the network connection with other network devices such as PC.
Connect the phone's PC port and computer's Network Port together using an Ethernet cable,
shown as below:
Connect Network and Power:
Power Adapter
Note: Headset is not included, should be purchased separately.
There are two ways for network and power source connections. You can either connect the phone
to the AC Power directly using the power adapter or to a PoE compliant switch or hub. Your system
administrator will advise you on which one to use.
SD Memory Card USB 2.0
Note: If inline power (PoE) is provided, do not install the AC adapter, make sure the Ethernet cable and switch /hub
are PoE compliant.
CD Content
IP Video Phone
Internet
PC
To Previous Page
Loading...
