Configuring the phone
PressćOKćbutton on the keypad of the phone to enter the Device Status page and find out the
IP address of the IP video phone. Enter it (for example http://192.168.3.35) into the address bar
of web browser.
The default login name and password are admin/admin.
Note: Please locate your PC in the same network segment of the IP phone(192.168.3.X) to access the web
configuration page. Please consult your network administrator or service p
rovider for help.
Note: Using the wrong network parameters may result in inaccessibility of your phone and may also have
an impact on your network performance! Please contact your network administrator!
Note: Please contact your service provider for more account details.
Network Setting: Click Setting->WAN options, input the password to enter the relating configuration
page. The default password is admin.
Account Setting: Click Setting->Account Se
tting option, input the password to enter the account
configuration page. The default password is admin.
Choose Network->Internet Port (WAN)
Choose Account->Account
Network Settings:
DHCP(Obtain an IP Address Automatically): By default the phone attempts to contact a DHCP
Server in your network in order to obtain its valid network settings, e.g. IP address, sub mask,
gateway, DNS server, etc.
PPPoE(Behind xDSL Modem): If you are using the xDSL Modem, you can connect your phone
to the internet via PPPoE mode. Please contact your ISP for the
User Name and Password for
internet access.
Static IP(Use the Following IP Address): If your phone cannot contact a DHCP Server for any
reason, you need to enter the network settings manually via Static IP Address. Please contact
your internet administrator for more details.
Account Setting:
Account Active: Defines whether to enable this account.
Display Name: It is shown as Caller ID when making a phone call.
User Name: User account information, p
rovided by VoIP service provider.
Register Name: It is authenticated ID for authentication, provided by ISP.
Password:
SIP Server: Server for registration, provided by ISP.
Parameter:
Configuring via Web Page
You can refer to the above "Configuring via Web Page" for the parameter details.
The default language is English. It supports several kinds of languages, users
can choose a prefer one to use.
Click Setting->Personalize->Language->OK to pop up the pull-down menu, press Up/Down navigation
keys to choose the language, then click Save softkey to confirm the change.
Language Setting:
Configuring via Keypad
It is provided by ISP for registration.
V30.0
Quick Installation
VP-2009(P)
IP Video Phone
You can download the latest user manuals from our website:
http://www.yealink.com/en/download.asp?BigClassName=IP%20Phone
To Next Page
Need help?
General
