2
W70B Package Contents
Power Adapter
Base Stand
W70B Base Station
Ethernet Cable
Assembling the DECT Phone
1. Connect the base station power and the network using method a or
method b.
a. AC Power Option
b. PoE (Power over Ethernet) Option
IEEE 802.3af compliant
PoE Hub/Switch
Note:
• If you choose method a, use Yealink supplied power adapter (5V/0.6A). A third-party power adapter may
damage the base station.
• If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is PoE-
compliant.
To Next Page
Loading...
