Need help?Do you have a question about the Yealink W79P and is the answer not in the manual?
General| Mounting | Desk/Wall |
|---|---|
| Device lock | Yes |
| Handset type | Wireless handset |
| Product type | IP mobile phone |
| Product color | Black |
| Frequency band | 1.9 GHz |
| Lines quantity | 20 lines |
| Phonebook capacity | 1000 entries |
| Number of VoIP accounts | - |
| Networking standards | IEEE 802.3af |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Keypad number of keys | 25 |
| Number of function keys | 6 |
| Display diagonal | 1.8 \ |
| Display resolution | 128 x 160 pixels |
| Maximum indoor range | 50 m |
| Maximum outdoor range | 300 m |
| Ethernet LAN (RJ-45) ports | 1 |
| Battery voltage | 3.7 V |
| Battery capacity | 1460 mAh |
| AC adapter input voltage | 100 - 240 V |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Number of handles included | - pc(s) |
| Harmonized System (HS) code | 85171800 |
Weight and Dimensions| Package depth | 182 mm |
|---|---|
| Package width | 205 mm |
| Package height | 95 mm |
| Package weight | 9096 g |
| Base dimensions | 130 x 100 x 25.1 mm |
| Handset dimensions (WxDxH) | 157 x 51 x 24 mm |
Identifies the Yealink W59R DECT IP phone handset.
Identifies the Yealink W70B DECT IP phone base station.
Includes two power adapters for the DECT IP phone system.
Component for securing the battery in the handset.
The rechargeable battery pack for the handset.
An optional decorative cover for the base station.
The cradle used to charge the handset.
Cable for connecting the base station to the network.
Stand for positioning the base station.
The document itself, providing initial setup instructions.
Connects the base station using a standard AC power adapter.
Connects the base station via an Ethernet cable with PoE support.
Instructions for attaching and removing the base stand for desktop use.
Instructions for attaching the base station to a wall.
Procedure for inserting the rechargeable battery into the handset.
Optional steps for mounting the charging cradle on a wall.
How to connect the charging cradle and charge the handset.
Detailed technical data for the DECT IP phone.
The earpiece and microphone section of the handset.
Indicator light on the handset showing power status.
The display screen of the handset.
Programmable keys below the phone screen.
Key to access voicemail or message notifications.
Key to activate or deactivate the speakerphone function.
Keys used for menu navigation and selection.
Key for confirming selections and actions.
Key for ending calls or powering the device on/off.
The numeric and function keys on the handset.
Key used for call transfer operations.
Key to mute or unmute the microphone during a call.
The microphone located at the bottom of the handset.
The speaker for audio output, located at the bottom.
Keys to adjust the audio volume.
Button that triggers an alarm function.
Specifies the recommended operating and storage temperature ranges.
Details regarding the product warranty and limitations.
Defines symbols used in the documentation, like DC and WEEE.
Information about the disposal of electronic waste.
Compliance statement for RoHS directive.
General safety precautions for using the device.
Basic requirements for installation, operation, and maintenance.
Guidelines for device placement and environment.
Precautions and guidelines for operating the device.
Specific instructions and warnings for battery usage.
Instructions on how to clean the device safely.
Common issues and solutions for the DECT IP phone.
Compliance statement for Federal Communications Commission regulations.
Compliance statement for Industry Canada regulations.
Information regarding radiation exposure limits and compliance.
Contact details for Yealink global offices.
Overview of Yealink as a company and its market position.
Resources and methods for obtaining technical assistance.
To Next Page
