Deploying the Device
Note:
• If you choose method A, use Yealink supplied power adapter (5V/1.2A). A third-party
power adapter may damage the device.
• If you choose method B, you do not need to connect the power adapter. Make sure the
hub/switch is PoE-compliant.
You can connect the W75 Mini MC to your local network via a router or PoE switch.
1. Plug a POE or network cable + power supply that come with the W75DM into the
network and power port of the W75B. As shown in Figure 1, 2, 3, 4.
2. Connect the power and the network cable using method A or method B.
3. At this time, the LED indicator status are as follows:
• Deploy one W75 Mini MC
❶ ❷ ❸❹
⬇
⬇⬇
⬇
Power Adapter
Ethernet Cable
A
. AC Power Option
B
. PoE (Power over Ethernet) Option
IEEE 802.3af compli-
ant PoE Hub/Switch
LAN LED: green
ROLE LED: orange
DECT LED: green
To Next Page
Loading...
