yeedi CH1918 - User Manual

Questions and Answers

V
vharmonAug 5, 2025
What to do if my yeedi Desktop robot fails to self-empty the dust bin?
- M
  Ms. Lauren JohnsonAug 5, 2025
  There are several reasons why your yeedi Desktop robot might fail to self-empty its dustbin: * The self-empty dustbin might not be installed correctly. Ensure it is properly installed with the two self-empty outlets on the bottom. * The dust bag could be full. Try replacing the dust bag and closing the dust container lid. * The self-empty outlets on the self-empty dustbin may be blocked by debris. Uninstall the self-empty dustbin and clean any debris from the outlets. * The dust evacuation tube might be blocked. Make sure to clean the dust evacuation tube.
J
Joel MayoAug 27, 2025
Why is there debris in the dust container of my yeedi Desktop?
- R
  Richard ShepherdAug 27, 2025
  If you notice debris in the dust container of your yeedi Desktop robot, it could be due to: * Fine particles being absorbed inside the dust container through the dust bag. Clean the dust container lid and inner wall. * A damaged dust bag. Check the dust bag and replace it if necessary.
C
Cheryl MyersNov 14, 2025
Why does my yeedi Desktop robot not start self-emptying after returning to the station?
- J
  Jason JenkinsNov 14, 2025
  Your yeedi Desktop robot might not start self-emptying after returning to the self-empty station due to several reasons: * The dust container lid might not be closed properly. Ensure that the dust container lid is closed. * The dust bag might not be installed correctly in the self-empty station. Install the dust bag and close the dust container lid. * Manually moving the robot to the self-empty station will not trigger self-emptying. To ensure successful self-emptying, avoid picking up and moving the self-empty station during cleaning. * If the robot returns to the self-emptying station while running Video Manager in the app, this is normal. * Do Not Disturb mode might be enabled in the yeedi app. Disable Do Not Disturb mode in the app or start self-emptying manually. * The du...