Need help?Do you have a question about the Yeswelder CT2050 and is the answer not in the manual?
General| Input Voltage | 110/220V |
|---|---|
| Input Frequency | 50/60Hz |
| Welding Process | TIG/MMA/Plasma Cutting |
| TIG Welding Current | 10-200A |
| Plasma Cutting Current | 20-50A |
| Duty Cycle | 60% |
| Weight | 22 lbs (10 kg) |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Insulation Class | F |
| Protection Class | IP21S |
| Input Phase | Single Phase |
| Output Current | 200A |
| Rated Output | 200A |
| Cooling System | Fan Cooling |
Covers introduction, warnings, cautions, fume handling, PPE, and special situations.
Details specific situations and types of hazards to be aware of during operation.
Details Proposition 65 and Electric/Magnetic Field warnings.
Covers dangers from electric shock and arc rays.
Details the dangers associated with welding fumes and gases.
Covers safety related to fire, gas cylinders, and electrical equipment.
Covers technical specs, installation warnings, location, stacking, and tilting.
Details the functions and layout of the welder's control panel.
Step-by-step guide for setting up TIG welding (GTAW).
Covers operating environment conditions and general safety advice.
Covers basic knowledge, process, tools, and operation of stick welding.
Details proper posture and methods for igniting the welding arc.
Covers tack welding and basic electrode movement techniques.
Describes arc extinguishing techniques and post-weld cleaning.
Provides an introduction to Argon Arc Welding (TIG).
Highlights the features and benefits of argon arc welding.
Covers the fundamental aspects of GTAW.
Details the GTAW process, including pre-weld cleaning methods.
Explains the role and importance of gas protection in welding.
Discusses selecting process parameters for GTAW.
Covers general requirements for argon arc welding.
Describes the basics and advantages of plasma cutting.
Covers operational methods and important notes for plasma cutting.
Addresses common problems and solutions in plasma cutting.
Guides on when and how to replace electrodes and nozzles.
Describes the operation of optional accessories like pedal remoters.
Covers routine maintenance steps for the welder.
Details how to maintain consumables to prevent premature replacement.
Explains how to use the troubleshooting guide and common error codes.
Lists common error codes, their reasons, and recommended solutions.
Addresses common problems encountered during TIG welding.
Covers troubleshooting for HF TIG and tungsten-related problems.
Addresses common problems encountered during plasma cutting.
Focuses on troubleshooting plasma cutting quality and edge angle.
Addresses common problems encountered during stick welding.
To Next Page
