YIHUA 853A - Specification

3. Air Gun heater use ceramic heater, heating elements firmly wrapped around the
model ceramic, rapid and uniform heating. Use the upgraded version fan, the
airflow larger than the ordinary fan, spiral out of the wind, long life.
4. Soldering iron part using Hakko heater, heating up rapidly, temperature stability,
long service life; antistatic design to prevent electrostatic damage to delicate
SMD components.
5. The machine has a self - test function full intelligent over - temperature, short-
circuit, overload and fault display and protection functions.
6. 853 preheating station practical and easy to operate,the card plate sliding series
bracket bearing technology, to move around durable, convenient card board,
coupled with a fixed sliding bracket screws at the same time, the card board is
solid and reliable.
7. 853AA/853AAA temperature correction function to adapt to the environmental
impact:
Or replace the heating elements, soldering iron tips etc. Spare parts caused by
temperature deviation, can use this function calibration temperature. The corre-
ction temperature range is -50°C~+50°C.
8. 853AA/853AAA has Celsius/Fahrenheit temperature display function:
Meet different market needs to design the temperature display mod, you can
choose under customary interest.
3 4
III. Specification
Voltage
Weight
Power
853A 853AA 853AAA
AC 220V ±5% AC 220V ±5% AC 220V ±5%
≤500W ≤1200W ≤1270W
3.0kg
0~40°C/32~104°F
-20~80°C/-4~176°F
35%~45%
Model
Work environment
Storage environment
Store humidity
Size
L320xW220xH100mm ±5mm
L250xW220xH90mm ±5mm
4.5kg 5.6kg
50~300°C or 50~400°C / 122~572°F or 122~752°F
±2°C（static）
LED
120x120mm
Preheating station
Temperature Range
Temperature Stability
Display Type
Area
≤130L/min
100°C~480°C/212°F~896°F
LED
≥100cm
200°C~480°C/392°F~896°F
<2mV
<2ohm
LED
≥100cm
Hot Air Reworks
Airflow type
Air Flow
Temperature Range
Temperature Stability
Display Type
Handle cable length
Soldering Iron
Temperature Range
Temperature Stability
Tip of ground voltage
Tip ground impedance
Display Type
Handle cable length
±1°C（static）
±1°C（static）
Brushless fan gentle wind
IV. Performance Comparison Table
Function
Functional components
Preheating station
Preheating station
+Hot air reworks
Preheating station
+Hot air reworks+
Soldering station
Display type
Fahrenheit/Celsius
Conversion
Temperature correction
High temperature protection
Gun Type
Control Temperature way
853A 853AA 853AAA
Model
Digital PID Digital PID Digital PID
YES YES
YES YES YES
YES YES
LEDLED LED
Brushless fan Brushless fan
---
NO
NO