viii
IM 34M06P15-03E 2nd Edition: Jan. 31, 2012-00
Introduction
Overview of the Manual
This manual explains the commands and responses for communication control with
higher-order computers via Modbus/TCP and with the sequence CPU module used with
the FA-M3 (F3SP71-4S, F3SP76-7S).
Related User’s Manuals
Depending on the type of the CPU module, you should refer to different user's manuals.
z About functions
- Sequence CPU Instruction Manual - Functions (for F3SP71-4N/4S, F3SP76-7N/7S)
(IM 34M06P15-01E)
- Sequence CPU - Network Functions (for F3SP71-4N/4S, F3SP76-7N/7S)
(IM 34M06P15-02E)
z To create ladder programs
- FA-M3 Programming Tool WideField3 (IM 34M06Q16-E)
Refer to the following manuals, if required.
z For FA-M3 specifications and configuration*
1
, installation and wiring,
test run, maintenance and inspection or system-wide restrictions on
module installation
*1: For specification of products other than the power supply module, base module, input/output module, cable, and
terminal unit, refer to the respective product manuals.
- Hardware Manual (lM 34M06C11-01E)
F3SP71
F3SP76
To Next Page
Loading...
Need help?
General