<Toc> <3. Operations>
3-1
IM 05F01D02-41E
3. Operations
This chapter describes key entries for operating the indicator. If you cannot remem-
ber how to carry out an operation during setting, press the
SET/ENT
key for more than 3
seconds. This brings you to the display (operating display) that appears at power-
on.
NOTE
Do not use the instrument generating strong magnetic field such as radio equipment and
the like near the indicator. This may cause the fluctuation of the PV value.
3.1 Monitoring-purpose Operating Display Available
during Operation
The following is the monitoring-purpose operating display available during operation.
PV
AL1234
SET/ENT
Power On
Displays PV.
1st Edition : May 31,2000-00
To Next Page
Loading...
Need help?
General
