27
Control-D2D Device-to-Device
Pairing, Continued
R
When the Water Leak Sensor detects water, the
YoLlink Gas/Water Valve Controller will now
immediately close the valve. The valve will
remain closed until opened via the app or using
the SET button; the restoral of the Water Leak
Sensor to normal (no water detected) does not
open the valve
More advanced sequences, controlling multiple
outputs (e.g.close valve and activate siren)are
available via the YoLink app
Probe
Floor
Water detected
(Water depth >0.01 inch)
Water Leak Sensor 4
Closed
Water Pipe
Opened
To Next Page
Loading...
Need help?
General
