EasyManua.ls Logo

Yome CF181 - Startup; Usage; Fortifying Mode

Yome CF181
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
6 Startup
l Put the SIM card in place,the LED indicator will flash after several
seconds.(NOTE:The tracker turns on atuomatically while the sim card slot be
inserted,and the tracker turns off automatically while the sim card slot take out.)
l After connecting the wires with the tracker and the car,then you can see the LED
indicator flashs green arounds the wires connector(re.3.1 wires connector)
l In 40-60 seconds, the unit will start to work and receive the GSM signals as well as
the GPS signals.When this unit receives GPS signals normally, you can use it and
do all the following settings.
7 Usage
The tracker has three working modes: Fortifying mode, Tracking mode and Monitoring
mode.
8 Fortifying Mode
When turn on the tracker, the default mode is Fortify mode.In fortifying mode, you can
call the tracker to activate the “protection” for your loved car or vehicle. The indicator will
flash every 4 seconds when the “protection “ is activated.
While the “protection” will be deactivated when you dial up the tracker again, the indicator
will flash every 1 second when the deactivation is done.
Put a SIM card into the slot.
Insert the slot with SIM card into the tracker.
PDF created with pdfFactory trial version www.pdffactory.com