Yome CF181 - Car Alarm System Integration; Check Working Status; Tracking Mode; Initialization

8
8.4 Application in the Car Alarm System
If your car equipped with a car alarm system,you can connect the white wire(re.3.2
wire4) to the positive wire of microphone on the car alarm.The authorized number will
receive an alert if the car alarm sounds more than 10 seconds
.
Alert SMS format:
lat: 22.567835N long: 114.051397E speed: 000.0 23/12/09 01:55 bat:F Signal:F
Trigger imei:356895033307722
8.5 Checking the Working Status ( fortify or no fortify )
You can send SMS command message to tracker, it will report “ fortifying “ or “ no fortify
“ to you.
Reply message means out of Fortifying mode, Reply message means under Fortifying
mode.
When the tracker is in tracking mode or monitoring mode, send a SMS command
message to switch to the "Fortifying mode", under fortifying mode, make a call to
activate the protection of your loved ones or car
9 Tracking Mode
9.1 Initialization
Send SMS message to the unit, it will reply “begin ok” and initialize all the settings.
9.2 Change the Password
Send SMS message change the password.
Remark:
9.2.1 Be sure keep the new password in mind, you have to upload the software to
restore the original setting in case of losing the new password.
PDF created with pdfFactory trial version www.pdffactory.com