Yome CF181 - Authorization; Auto-Track

9
9.3 Authorization
There are only 5 numbers able to be authorized numbers.
9.3.1 Setup:Send SMS message phone number to set up the first
authorized number.The other authorized numbers should be setup by the first
authorized number. If the number is successfully authorized, the unit will reply SMS as
“admin ok!”.
9.3.2 Cancel:Send SMS message number to delete the authorized number.
9.3.4 When an authorized number dials up the unit, it will hang up and report a real-time
Geo-info as below:
Lat: 22.566901 long: 114.051258 speed: 0.00 14/08/09 06.54 bat:F Signal:F help me
imei:354776031555474
Lat: 22.566901 long: 114.051258==Coordinate
0.00 == speed
14/08/09 06.54== Date&Time
bat:F == battery power is full,while ‘L’means battery power is low
Signal:F == Full GPS signal ‘L’ means no GPS signal
help me == the SOS message, this section is blank for tracking message
354776031555474== IMEI
9.4 Auto-Track
This function is using for the user to receive SMS with Geo-info in a certain time.
PDF created with pdfFactory trial version www.pdffactory.com