York Predator XP150 - User Manual

To Next Page

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

528195-YTG-I-0513

TECHNICAL GUIDE

Description

ASHRAE 90.1 COMPLIANT

YORK

Predator

units are convertible single packages with a

common footprint cabinet and common roof curb for all 6-1/2

through 12-1/2 ton models. All units have two compressors with

independent refrigeration circuits to provide 2 stages of cooling.

The units were designed for light commercial applications and

can be easily installed on a roof curb, slab, or frame.

All Predator

units are self-contained and assembled on rigid

full perimeter base rails allowing for 3-way forklift access and

overhead rigging. Every unit is completely charged, wired,

piped, and tested at the factory to provide a quick and easy field

installation.

All units are convertible between side and down airflow.

Independent economizer designs are used on side and down

discharge applications, as well as all tonnage sizes.

Predator

XP units are available in the following configurations:

heat pump and heat pump with electric heat. Electric heaters

are available as factory-installed options or field-installed

accessories.

Tested in accordance with:

R-410A

XP SERIES

6-1/2 THRU 12-1/2 TON

60 Hertz

6-1/2 THROUGH 10 TON

12-1/2 TON

Main Page

Brand	York
Model	Predator XP150
Category	Air Conditioner
Language	English

Brand

York

Model

Predator XP150

York Predator XP150 - User Manual

Table of Contents

Summary

Product Description

ASHRAE 90.1 Compliant

Nomenclature

Features and Benefits

Standard Features

Guide Specifications

General Unit Requirements

Physical Data

Cooling Performance Data

Heating Capacities

XP078-150 Heating Performance

Airflow Performance

Side Duct Applications

Electrical Data

Standard Motor Electrical Specifications

Typical Wiring Diagrams

Heat Pump Unit Wiring Diagrams

Weights and Dimensions

Unit Load and Dimensional Data