York Predator XP090 User Manual

®
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
528195-YTG-I-0513
TECHNICAL GUIDE
Description
ASHRAE 90.1 COMPLIANT
YORK
®
Predator
®
units are convertible single packages with a
common footprint cabinet and common roof curb for all 6-1/2
through 12-1/2 ton models. All units have two compressors with
independent refrigeration circuits to provide 2 stages of cooling.
The units were designed for light commercial applications and
can be easily installed on a roof curb, slab, or frame.
All Predator
®
units are self-contained and assembled on rigid
full perimeter base rails allowing for 3-way forklift access and
overhead rigging. Every unit is completely charged, wired,
piped, and tested at the factory to provide a quick and easy field
installation.
All units are convertible between side and down airflow.
Independent economizer designs are used on side and down
discharge applications, as well as all tonnage sizes.
Predator
®
XP units are available in the following configurations:
heat pump and heat pump with electric heat. Electric heaters
are available as factory-installed options or field-installed
accessories.
Tested in accordance with:
R-410A
XP SERIES
6-1/2 THRU 12-1/2 TON
60 Hertz
6-1/2 THROUGH 10 TON
12-1/2 TON
®

York Predator XP090 Specifications

General

Heating Seasonal Performance Factor (HSPF)	9.0
Refrigerant Type	R410A
Cooling Capacity	9000 BTU
Noise Level (Outdoor Unit)	50 dB
Dimensions (Outdoor Unit)	720 x 270 x 495 mm
Refrigerant Pipe Connection Size	1/4" and 3/8"
Max Pipe Length	15 m
Max Height Difference	10 m

Summary

Product Introduction and Specifications

Unit Description and Compliance Overview

Provides a general overview of the YORK® Predator® units, highlighting features and compliance.

Component Location and Heat Pump Details

Details the location of key components within the heat pump unit's internal structure.

Model Number Nomenclature Guide

Explains the structure and meaning of the YORK® Predator® unit model number codes.

Guide Specifications for Unit Design

Specifies manufacturing standards, cabinet construction, fan assemblies, and refrigerant components.

Features, Benefits, and Options

Standard and Advanced Features

Highlights standard features like high efficiency, serviceability, advanced controls, and safety mechanisms.

Factory Installed Options and Economizers

Details factory-installed options, economizers, and related components for enhanced performance.

Field Installed Accessories Guide

Lists accessories available for field installation to customize unit performance and functionality.

Performance Data and Electrical Information

Physical Data and Performance Metrics

Presents physical data, dimensions, weights, and key cooling/heating performance metrics.

Cooling Capacity Performance Tables

Detailed cooling capacity ratings across various models, conditions, and CFM.

Heating Capacity Performance Data

Provides heating capacity ratings for the units under different temperature conditions.

Electrical Data and Wiring Diagrams

Provides detailed electrical data, wiring diagrams, and circuit protection information.

Operational Details and Selection

Airflow Performance and Static Resistance

Details airflow performance data, static resistance, and selection procedures for optimal operation.

Drive Selection and RPM Tables

Explains drive selection procedures and provides RPM selection tables for motor/drive matching.

Sound Performance Levels

Presents indoor and outdoor sound power levels for the unit models.

Unit Dimensions and Accessories

Provides unit dimensions, clearances, and accessory dimensions for installation planning.