York Predator XP102 User Manual

®
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
528195-YTG-I-0513
TECHNICAL GUIDE
Description
ASHRAE 90.1 COMPLIANT
YORK
®
Predator
®
units are convertible single packages with a
common footprint cabinet and common roof curb for all 6-1/2
through 12-1/2 ton models. All units have two compressors with
independent refrigeration circuits to provide 2 stages of cooling.
The units were designed for light commercial applications and
can be easily installed on a roof curb, slab, or frame.
All Predator
®
units are self-contained and assembled on rigid
full perimeter base rails allowing for 3-way forklift access and
overhead rigging. Every unit is completely charged, wired,
piped, and tested at the factory to provide a quick and easy field
installation.
All units are convertible between side and down airflow.
Independent economizer designs are used on side and down
discharge applications, as well as all tonnage sizes.
Predator
®
XP units are available in the following configurations:
heat pump and heat pump with electric heat. Electric heaters
are available as factory-installed options or field-installed
accessories.
Tested in accordance with:
R-410A
XP SERIES
6-1/2 THRU 12-1/2 TON
60 Hertz
6-1/2 THROUGH 10 TON
12-1/2 TON
®

York Predator XP102 Specifications

General

Brand	York
Model	Predator XP102
Category	Air Conditioner
Language	English

Summary

Features and Benefits

Standard Features

Enhancements for improved serviceability, including hinged panels, service windows, and non-corrosive drain pans.

Advanced Controls

Integrated low-ambient control, anti-short cycle protection, programmable fan delays, and safety monitoring.

Guide Specifications

GENERAL

Units are ISO 9001 certified, convertible single packages with common footprint and roof curb for 6.5-12.5 ton models.

DESCRIPTION

Factory assembled, single package units designed for outdoor installation, with field convertible duct connections.

UNIT CABINET

REFRIGERANT COMPONENTS

Fully hermetic, direct-drive compressors with internal protection, and aluminum plate fin coils.

Coils

Refrigerant Circuit and Refrigerant Safety Components

Fixed-orifice expansion devices, solid core filter-driers, and independent refrigerant circuits.

Unit Controls

Self-contained low-voltage control circuit with lockout, auto-reset protection, and on-board diagnostics.

ELECTRIC HEATING SECTION (IF EQUIPPED)

UNIT OPERATING CHARACTERISTICS

Airflow Performance

XP078-150 Side Duct Application

Airflow performance data for side duct applications across various static pressures and CFM.

XP078 (6.5 Ton) Side Duct

XP090 (7.5 Ton) Side Duct

XP102 (8.5 Ton) Side Duct

Electrical Data

XP078-150 Standard Motor - Without Powered Convenience Outlet

Electrical data for standard motor models without powered convenience outlet, listing MCA and fuse sizes.

XP078-150 Hi Static Motor - Without Powered Convenience Outlet

Electrical data for hi-static motor models without powered convenience outlet, detailing MCA and fuse sizes.

XP078-150 Standard Motor - With Powered Convenience Outlet

Electrical data for standard motor models with powered convenience outlet, showing MCA and fuse sizes.

XP078-150 Hi Static Motor - With Powered Convenience Outlet

Electrical data for hi-static motor models with powered convenience outlet, including MCA and fuse sizes.

Typical Wiring Diagrams

XP078-150 Heat Pump Unit W/O ELECTRIC HEAT

Wiring diagram for XP078-150 Heat Pump units without electric heat.

Typical XP078-120 Heat Pump with/without Electric Heat Wiring Diagram

Wiring diagram for XP078-120 Heat Pump units with and without electric heat.

Typical XP150 Heat Pump with/without Electric Heat Wiring Diagram

Weights and Dimensions

XP078-150 Unit Weights

XP078-150 Unit Dimensions

XP078-150 Unit Physical Dimensions

Economizer Options