York PREDATOR 102 User Manual

246646-YTG-C-0606
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
HIGH EFFICIENCY
SINGLE PACKAGE AIR CONDITIONERS AND
SINGLE PACKAGE GAS/ELECTRIC UNITS
DH 078, 090, 102, 120 and 150
6-1/2, 7-1/2, 8-1/2, 10 and 12-1/2 NOMINAL TONS
10.0-11.5 EER
TECHNICAL
GUIDE
TECHNICAL
GUIDE
®
®
DESCRIPTION
ASHRAE 90.1 COMPLIANT
YORK
®
Predator
®
units are convertible single packages with a
common footprint cabinet and common roof curb for all 6-1/2
through 12-1/2 ton models. All units have two compressors with
independent refrigeration circuits to provide 2 stages of cooling.
The units were designed for light commercial applications and
can be easily installed on a roof curb, slab, or frame.
All Predator
®
units are self-contained and assembled on rigid
full perimeter base rails allowing for 3-way forklift access and
overhead rigging. Every unit is completely charged, wired,
piped, and tested at the factory to provide a quick and easy field
installation.
All units are convertible between side and down airflow. Inde-
pendent economizer designs are used on side and down dis-
charge applications, as well as all tonnage sizes.
Predator
®
units are available in the following configurations:
cooling only, cooling with electric heat, and cooling with gas
heat. Electric heaters are available as factory-installed options
or field-installed accessories.
Tested in accordance with:

York PREDATOR 102 Specifications

General

Brand	York
Model	PREDATOR 102
Category	Air Conditioner
Language	English

Summary

DESCRIPTION

ASHRAE 90.1 Compliant

Specifies compliance with ASHRAE 90.1 energy standard.

FEATURES

High Efficiency Operation

Units reach up to 11.5 EER and 80% steady state efficiency.

Serviceability Enhancements

Features slide-out blower, toolless panels, and diagnostic flash codes.

Environmental and Air Quality

Units use foil-faced insulation exclusively for improved indoor air quality.

Heating Comfort and Airflow

Balanced heating provides consistent temperatures and convertible airflow design.

System Protection and Controls

Includes protection devices like freezestats and advanced control features.

Diagnostics and Reliability

Features on-board diagnostics, computer-automated testing, and durable paint.

Installation and Placement

Offers flexible placement with common footprint and base rails for easy installation.

Warranty Information

Covers 1-year limited warranty on unit, 5-year on compressors/heaters, 10-year on exchangers.

FACTORY INSTALLED OPTIONS

Economizer System Options

Offers various economizer options with low leak dampers and enthalpy sensing.

Heating and Electrical Options

Includes electric heaters, gas heat options, and conversion kits.

Control and Protection Options

Includes Phase Monitors, Smoke Detectors, Convenience Outlets, and Disconnect Switches.

Building Automation System Controls

Factory installed controls from Simplicity, Novar, Johnson, CPC, Honeywell.

FIELD INSTALLED ACCESSORIES

Economizer and Damper Kits

Includes various economizer types, manual and motorized outdoor air dampers.

Sensor, Protection, and Exhaust Accessories

Offers CO2 sensors, dirty filter switches, coil guards, hail guards, and flue extension kits.

Gas Heat, Filter, and Curb Accessories

Includes gas heat kits, filter kits, roof curbs, and thermostat options.

NOMENCLATURE

Model Number Breakdown

Explains the coding system for product category, capacity, heat type, and options.

DH PHYSICAL DATA

Component Specifications

Details blower, coil, refrigerant charge, compressor, and air filter specifications.

DH CAPACITY RATINGS

Cooling and Heat Capacity Data

Provides ARI ratings, CFM, sound rating, and heat capacity for various models.

Unit Voltage Limitations

Specifies minimum and maximum voltage ranges for power ratings.

COOLING CAPACITY DH078 (6-1/2 TON) UNIT

Capacity Data at 75°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 85°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 95°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 105°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

COOLING CAPACITY DH090 (7-1/2 TON) UNIT

Capacity Data at 75°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 85°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 115°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 125°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

COOLING CAPACITY DH102 (8-1/2 TON) UNIT

Capacity Data at 75°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 85°F Condenser Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 95°F Condenser Coil Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 105°F Condenser Coil Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 115°F Condenser Coil Temp

Details cooling capacity at various airflow and dry bulb temps.

Capacity Data at 125°F Condenser Coil Temp

Details cooling capacity at various airflow and dry bulb temps.

ELECTRICAL DATA DH078 (6-1/2 TON) HIGH EFFICIENCY W/O PWRD CONVENIENCE OUTLET

Electrical Specifications for 208/230V

Provides MCA, max fuse size, and heater specs for 208/230V units.

Electrical Specifications for 460V

Provides MCA, max fuse size, and heater specs for 460V units.

Electrical Specifications for 575V

Provides MCA, max fuse size, and heater specs for 575V units.

ELECTRICAL DATA DH090 (7-1/2 TON) HIGH EFFICIENCY W/O PWRD CONVENIENCE OUTLET

Electrical Specs for 208/230V

Provides MCA, max fuse size, and heater specs for 208/230V units.

Electrical Specs for 460V

Provides MCA, max fuse size, and heater specs for 460V units.

Electrical Specs for 575V

Provides MCA, max fuse size, and heater specs for 575V units.

ELECTRICAL DATA DH090 (7-1/2 TON) HIGH EFFICIENCY WITH PWRD CONVENIENCE OUTLET

Electrical Specs for 208/230V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 208/230V units with powered outlet.

Electrical Specs for 460V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 460V units with powered outlet.

Electrical Specs for 575V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 575V units with powered outlet.

ELECTRICAL DATA DH102 (8-1/2 TON) HIGH EFFICIENCY W/O PWRD CONVENIENCE OUTLET

Electrical Specs for 208/230V

Provides MCA, max fuse size, and heater specs for 208/230V units.

Electrical Specs for 460V

Provides MCA, max fuse size, and heater specs for 460V units.

Electrical Specs for 575V

Provides MCA, max fuse size, and heater specs for 575V units.

ELECTRICAL DATA DH102 (8-1/2 TON) HIGH EFFICIENCY WITH PWRD CONVENIENCE OUTLET

Electrical Specs for 208/230V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 208/230V units with powered outlet.

Electrical Specs for 460V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 460V units with powered outlet.

Electrical Specs for 575V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 575V units with powered outlet.

ELECTRICAL DATA DH120 (10 TON) HIGH EFFICIENCY W/O PWRD CONVENIENCE OUTLET

Electrical Specs for 208V

Provides MCA, max fuse size, and heater specs for 208V units.

Electrical Specs for 230V

Provides MCA, max fuse size, and heater specs for 230V units.

Electrical Specs for 460V

Provides MCA, max fuse size, and heater specs for 460V units.

Electrical Specs for 575V

Provides MCA, max fuse size, and heater specs for 575V units.

ELECTRICAL DATA DH120 (10 TON) HIGH EFFICIENCY WITH PWRD CONVENIENCE OUTLET

Electrical Specs for 208V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 208V units with powered outlet.

Electrical Specs for 230V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 230V units with powered outlet.

Electrical Specs for 460V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 460V units with powered outlet.

Electrical Specs for 575V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 575V units with powered outlet.

ELECTRICAL DATA DH150 (12-1/2 TON) HIGH EFFICIENCY W/O PWRD CONVENIENCE OUTLET

Electrical Specs for 208V

Provides MCA, max fuse size, and heater specs for 208V units.

Electrical Specs for 230V

Provides MCA, max fuse size, and heater specs for 230V units.

Electrical Specs for 460V

Provides MCA, max fuse size, and heater specs for 460V units.

Electrical Specs for 575V

Provides MCA, max fuse size, and heater specs for 575V units.

ELECTRICAL DATA DH150 (12-1/2 TON) HIGH EFFICIENCY WITH PWRD CONVENIENCE OUTLET

Electrical Specs for 208V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 208V units with powered outlet.

Electrical Specs for 230V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 230V units with powered outlet.

Electrical Specs for 460V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 460V units with powered outlet.

Electrical Specs for 575V with Powered Outlet

Provides MCA, max fuse size, and heater specs for 575V units with powered outlet.

DH078 (6-1/2) SIDE SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH090 (7-1/2 TON) SIDE SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH102 (8-1/2 TON) SIDE SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH120 (10 TON) SIDE SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH150 (12-1/2 TON) SIDE SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH078 (6-1/2 TON) DOWN SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH090 (7-1/2 TON) DOWN SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH102 (8-1/2 TON) DOWN SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH120 (10 TON) DOWN SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

DH150 (12-1/2 TON) DOWN SHOT BLOWER PERFORMANCE

Performance Data at 0.2-1.0 ESP

Provides RPM, BHP, Watts for external static pressures from 0.2 to 1.0 IWG.

Performance Data at 1.2-2.0 ESP

Provides RPM, BHP, Watts for external static pressures from 1.2 to 2.0 IWG.

ADDITIONAL STATIC RESISTANCE DH120 AND 150

Resistance Values for Cooling Only

Lists additional static resistance for cooling-only configurations.

Resistance Values for Economizer

Lists additional static resistance for economizer configurations.

Resistance Values for Electric Heat

Lists additional static resistance for electric heat configurations.

ADDITIONAL STATIC RESISTANCE DH078, 090, 102

Resistance Values for Cooling Only

Lists additional static resistance for cooling-only configurations.

Resistance Values for Economizer

Lists additional static resistance for economizer configurations.

Resistance Values for Electric Heat

Lists additional static resistance for electric heat configurations.

ELECTRIC HEAT MINIMUM SUPPLY AIR CFM

CFM Requirements by Voltage and kW

Provides minimum supply air CFM for electric heat based on voltage and kW.

INDOOR BLOWER SPECIFICATIONS

Motor and Sheave Details

Lists motor HP, RPM, frame, and sheave models for blower assemblies.

POWER EXHAUST SPECIFICATIONS

Motor and Electrical Data

Details motor HP, RPM, electrical data, and CFM for power exhaust units.

UNIT 4 POINT LOAD WEIGHT

Weight Distribution per Location

Provides weight distribution in lbs. for four lifting points.

UNIT 6 POINT LOAD WEIGHT

Weight Distribution per Location

Provides weight distribution in lbs. for six lifting points.

UNIT CENTER OF GRAVITY

X and Y Coordinates

Specifies the X and Y coordinates for the unit's center of gravity.

UNIT WEIGHT

Shipping and Operating Weights

Lists shipping and operating weights, including options.

UNIT DIMENSIONS

Unit Height Specifications

Provides the height dimension for each unit model.

UNIT CLEARANCES

Required Clearances for Installation

Specifies minimum clearances for top, front, rear, left, right, and bottom.

PREDATOR® ROOF CURB DIMENSIONS

Dimensions for Standard Roof Curbs

Illustrates dimensions for 8" or 14" high roof curbs.

SUNLINE™ TO PREDATOR® TRANSITION ROOF CURBS

Dimensions for Transition Roof Curbs

Illustrates dimensions for transition roof curbs between Sunline and Predator.

BOTTOM DUCT OPENINGS

Location and Size of Bottom Openings

Diagram showing bottom duct openings and their dimensions.

REAR DUCT DIMENSIONS

Dimensions for Rear Duct Openings

Diagram showing rear duct openings and their dimensions by cabinet size.

ECONOMIZER USAGE

Application and Model Cross-Reference

Details which economizer models are used for different applications and cabinet sizes.

FACTORY INSTALLED DOWNFLOW ECONOMIZER

Illustration of Factory Installed Unit

Diagram showing a factory installed downflow economizer with components.

FIELD INSTALLED DOWNFLOW ECONOMIZER W/POWER EXHAUST

Illustration of Field Installed Unit

Diagram showing a field installed downflow economizer with power exhaust.

FIELD INSTALLED HORIZONTAL ECONOMIZER W/POWER EXHAUST

Illustration of Horizontal Economizer Installation

Diagram showing a field installed horizontal economizer with power exhaust.

SLAB ECONOMIZER DOWNFLOW W/POWER EXHAUST

Illustration of Slab Economizer Installation

Diagram showing a slab economizer installation with power exhaust.

SLAB ECONOMIZER END RETURN W/POWER EXHAUST

Illustration of Slab Economizer End Return

Diagram showing a slab economizer end return installation with power exhaust.

COOLING UNIT WITH GAS HEAT WIRING 230 VOLT DIAGRAM

Elementary Wiring Diagram

Illustrates the elementary wiring for cooling units with gas heat at 230 volts.

COOLING UNIT WITH/WITHOUT ELECTRIC HEAT WIRING DIAGRAM

Elementary Wiring Diagram

Illustrates the elementary wiring for cooling units with or without electric heat.

COOLING UNIT WITH GAS HEAT WIRING 460, 575 VOLT 50 HZ DIAGRAM

Elementary Wiring Diagram

Illustrates the elementary wiring for cooling units with gas heat at 460/575V.

GUIDE SPECIFICATIONS

General Unit Overview

Describes unit manufacturing, footprint, compressor config, and installation.

Unit Description and Compliance

Details factory assembly, airflow, performance ratings, and standards.

Cabinet, Fan, and Coil Construction

Specifies cabinet materials, fan assembly, and coil construction details.

Refrigerant, Safety, and Control Systems

Covers refrigerant circuits, safety components, unit controls, and diagnostics.

Heating Section Requirements

Specifies requirements for gas and electric heating sections, including safety controls.

Unit Operating Characteristics and Electrical

Defines operating temps, fan delays, and electrical entry points.

Warranties and Optional Outdoor Air

Outlines warranties and factory installed economizer/damper options.

Additional Factory Installed Options

Lists options like alternate blowers, convenience outlets, electric heat, and phase monitors.

Pre-Engineered Accessories

Lists accessories such as roof curbs, barometric relief dampers, and conversion kits.