Controller
___________________________________________________________________________________
- 334 -
♦ System initiation
Before installation of system, it is essential to firstly install Microsoft SQL SERVER2000 (refer
Third Generation Network monitoring and control system operation manual for installation
process).Then begin system installation and after that run C:\Program
Files\SCUT\YDSNetControl\YDSIniting.exe
♦ Press “Test Database” and then a password box is prompted. The password is in the
installation guide file of the installation CD.
♦ Execute the buttons in the window from up to bottom to complete system initiation.
♦ After completion of the above process, all the indoor units, outdoor units, indoor centralized
controllers and outdoor centralized controllers will be stored in the database according to their
addresses.
To Next Page
Loading...
