Controller
___________________________________________________________________________________
- 339 -
3.4.3 Input of outdoor unit
♦ To create an outdoor unit, you can select an address from the outdoor centralized controller
address drop down box. Then all the outdoor units under the centralized controller are in the
list.
♦ Press “New” and then the list will display a blank line. Click the blank to input the address,
name and model of the outdoor unit and its icon in the system. In the meanwhile select the set.
Then press “Update” complete input of outdoor unit.
♦ After selecting the address of centralized controller, click the outdoor unit to be modified in
the left list. Then you may modify the outdoor unit parameters from the options on the right.
♦ If an outdoor unit does not exist, select the outdoor unit and then press “Delete” to delete
the outdoor unit.
To Next Page
Loading...
