York CHAMPION R-410A User Manual

036-21548-001-D-0405
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
CHAMPION
®
R-410A
SINGLE PACKAGE GAS/ELECTRIC
AIR COOLED AIR CONDITIONERS
2 THRU 5 NOMINAL TON
DNZ024, 030, 036 and 042
13 SEER
DNZ048 and 060
12 SEER
®
ISO 9001
Certified Quality
Management System
FLEXIBLE LIGHT COMMERCIAL UNIT
GENERAL
YORK’s Champion
®
package units are designed to handle
applications ranging from residential to light commercial and
any in between. The Champion
®
is a unit that gives you the
flexibility and choices you need in today’s market.
FEATURING
• R-410A REFRIGERANT
• COOLING/GAS HEATING UNITS (NATURAL GAS OR
PROPANE)
• LOW PROFILE
• QUIET OPERATION
• COMMON FOOTPRINT
• OPTIONAL SLIDE IN MOTORIZED DAMPERS
• OPTIONAL SLIDE IN ECONOMIZERS
• OPTIONAL PROPANE CONVERSION KIT
• OPTIONAL HIGH ALTITUDE CONVERSION KIT
(NATURAL GAS/PROPANE)
• OPTIONAL LOW NOx KIT
• FULL PERIMETER BASE RAILS
• BOTTOM AND SIDE UTILITY CONNECTIONS
• 1” OR 2” CLEANABLE FILTERS STANDARD ON ALL
3 PHASE MODELS. OPTIONAL ON 1 PHASE MODELS
• WARRANTY - 1 PHASE
• 10 year compressor
• 20 year heat exchanger
• 5 year other parts
• WARRANTY - 3 PHASE
• 5 year compressor
• 10 year heat exchanger
• 1 year other parts

York CHAMPION R-410A Specifications

General

Brand	York
Model	CHAMPION R-410A
Category	Air Conditioner
Language	English

Summary

YORK Champion Series Technical Guide

General Unit Overview and Features

Overview of YORK Champion package units, including general features and benefits.

Product Identification and Benefits

Nomenclature, Description, and Standard Benefits

Explains unit nomenclature, provides a general description, and lists standard features and benefits.

Field-Installed Accessories

Accessory Options and Kits

Details various field-installed accessory kits for unit customization and performance enhancement.

Unit Dimensions and Clearances

Front Dimensions and Minimum Clearances

Provides front unit dimensions and required minimum clearances for installation.

Installation Guidance

Typical Ground and Roof Installation

Illustrates typical installation methods for ground and roof curb mounting.

Unit Configuration and Weight

Ducting and Center of Gravity

Details typical duct applications and unit center of gravity information.

Roof Curb Specifications

Roof Curb Dimensions and Cross-Section

Provides specific dimensions and cross-section details for roof curb installations.

Technical Data and Diagrams

Wiring Diagrams and Electrical Data

Presents typical wiring diagrams and electrical data for unit configurations.

Detailed Specifications and Notes

Wiring Notes and Mechanical Specifications

Contains notes for wiring diagrams and outlines key mechanical specifications of the unit.