JOHNSON CONTROLS
2
FORM 102.20-FA1 (LS01)
Table 1 - Fasteners for Solution Units (cont.)
PART
NUMBER
DESCRIPTION WHERE USED
021-19597-000 SCREW, HEX, THREAD FORMING, 5/16” x 3/4”, SS Fan Skid, Coil Supports, Coil Blockoff to
Coil Casing
021-01155-000 WASHER, LOCK, INTERNAL TOOTH, 3/8”, ZINC PLTD. Fan Skid, Lifting Lugs
021-08388-000 SCREW, HEX CAP, 1/2”-13 x 1”, ZINC PLTD. Fan Skid, Safety Grade
021-13734-000 SCREW, PHILLIPS PAN HEAD, THREAD CUTTING, 1/4” x 1/2”, ZINC PLTD. Hood & Hood Gutter
021-19564-000 SCREW, PHILLIPS PAN HEAD, THREAD CUTTING, 1/4” x 1/2”, SS Hood & Hood Gutter
021-19586-000 NUT, HEX, 3/8”-16, ZINC PLTD. Lifting Lugs
021-19570-000 SCREW, HEX SOCKET, BUTTON HEAD, 3/8”-16 x 3/4”, ZINC PLTD. Lifting Lugs, Corners, Top split, Stack-
ing Plate
021-19556-000 SCREW, HEX CAP, FULL THREAD, 1/2”-13 x 9”, ZINC PLTD. Motor Base
021-19558-000 BLOCK, MOTOR BASE, 1/2”-13 & 3/8”-16 THRU HOLES Motor Base
021-19581-000 SCREW, HEX CAP, 3/8”-16 x 2-1/2”, ZINC PLTD. Mounting Kit, 2KVA Transformer
021-19582-000 SCREW, MACHINE, PHILLIPS PAN HEAD, #10-32 x 1/2”, WITH CAPTIVE
INTERNAL TOOTH WASHER, ZINC PLTD.
Mounting Kit, 500VA / 150VA Control
Transformer & Mounting Kit, Small
MCC Panel
021-19547-000 NUT, RIVET, KNURLED, 1/2”-13, ZINC PLTD. Mounting Kit, Large MCC Panel
021-19580-000 NUT, RIVET KNURLED, 3/8”-16, ZINC PLTD. Mounting Kit, Large MCC Panel
021-19579-000 NUT, RIVET KNURLED, #10-32, ZINC PLTD. Mounting Kit, Small MCC Panel
021-19589-000 RIVET, POP, 0.13” DIA., .19”-.25” GRIP Panel Outer to Liner
021-13656-000 NUT, WELD, 3/8”-16, ZINC PLTD. Pipe Chase Base Rail
021-17722-000 “SCREW, PHILLIPS PAN HEAD, THREAD FORMING SHEET METAL,
1/4”” x 3/4””, ZINC PLTD.”
Primary Screw for Inside Sheet Metal,
Panels Outside Unit , Damper Mount-
ing, Shipping Tie Down to Raceway
021-19599-000 SCREW, PHILLIPS PAN HEAD, THREAD FORMING, 1/4”-14 x 3/4”, SS Primary Screw for Inside Sheet Metal,
Panels Outside Unit , Damper Mount-
ing, Shipping Tie Down to Raceway
021-01154-000 WASHER, LOCK, INTERNAL TOOTH, 5/16”, ZINC PLTD. RF Filter Tracks
021-02523-000 NUT, HEX, 5/16”-18, ZINC PLTD. RF Filter Tracks
021-08394-000 SCREW, HEX CAP, 5/16”-18 x 3/4”, ZINC PLTD. RF Filter Tracks
021-09983-000 WASHER, FLAT, 3/8” ID x 7/8” OD x 0.083” THK, ZINC PLTD. RF Filter Tracks
021-19587-000 RIVET, POP, 0.19” DIA., 1/4” x 3/8” GRIP, ZINC PLTD. “RF Front or Rear Load Filter Frames
(Was P/N 033-05003-606)”
021-19565-000 SCREW, HEX, SELF DRILLING, 1/4”-14 x 1”, ZINC PLTD. W/ZINC PLTD.
EPDM WASHER
Roof
021-08395-000 SCREW, HEX CAP, 3/8”-16 x 3/4”, ZINC PLTD. Secures Block to Motor Base
021-19546-000 SCREW, SELF-DRILLING, 1/4”-14 x 1”, SS Self Drill Screw for Various Locations
When Required
021-19560-000 SCREW, PHILLIPS PAN HEAD, SELF-DRILLING, 1/4”-14 x 1”, ZINC PLTD. Self Drill Screw for Various Locations
When Required
021-19563-000 SCREW, PHILLIPS PAN HEAD, SELF-DRILLING, 1/4”-14 x 1”, SS Self Drill Screw for Various Locations
When Required
021-01267-000 WASHER, FLAT, 7/16” ID x 1” OD x 0.083” THK, ZINC PLTD. Snubber
021-19559-000 SCREW, HEX CAP, 3/8”-16 x 5”, FULL THREAD, ZINC PLTD. Snubber
021-19567-000 PLUG, 59/64” HEAD DIA., STEEL FINISHING TO FIT 3/4” ID HOLE Top Corner Connector Foam Hole Plug
To Next Page
Loading...
