EasyManua.ls Logo

York YC090-300 - User Manual

York YC090-300
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TECHNICAL GUIDE
R-410A
SPLIT-SYSTEM
AIR-COOLED CONDENSING UNITS
AND AIR HANDLERS
PREDATOR® SERIES
YC090-300 and YD120-240
CONDENSING UNIT MODELS
PC090-180 and PD180-240
HEAT PUMP UNIT MODELS
NC090-300 and ND120-240
AIR HANDLING UNIT MODELS
NL090-300 and NM120-240
AIR HANDLING UNIT MODELS
7.5 - 25 Ton
60 Hertz
505428-YTG-V-0417
ISO 9001
Certified Quality
Management System
YC/YD/PC/PD Outdoor Units
NC/ND/NL/NM Indoor Units
YC/YD/PC Outdoor Units
(Except YC300)
Description
Predator® condensing units and heat pumps are completely
assembled, piped and wired at the factory to provide a single-piece
unit for shipment and rigging. Each unit is pressurized with a holding
charge of refrigerant R-410A for storage and/or shipping.
The compact design, clean styling, small footprint, and quiet operation
make these condensing units and heat pumps suitable for almost any
outdoor location. On rooftops... because they weigh much less than a
single package unit of similar capacity and are much easier to rig and
support. On the ground... because the footprint is compact allowing a
variety of applications.
Both the Predator® condensing units and heat pumps are equipped
with reliable Smart Equipment™ microprocessor controls to assure
proper operation and unit protection for long product life. Products
from 10 to 20 tons are available in single or dual (2 or 4 pipe)
refrigerant circuits for redundancy in operation and various
applications.
The Predator® air handling units are completely assembled units,
including a well-insulated cabinet, a DX cooling coil with copper tubing,
aluminum fins, expansion valve(s), distributor(s), 2” throwaway filters,
a centrifugal blower, a blower motor, an adjustable belt drive, a blower
motor contactor and a small holding charge of nitrogen.
Units are shipped in the vertical
position ready for field installation,
but can be easily converted to
horizontal position. An added
benefit of the Predator® air
handling units is they are designed
to operate with either a
condensing unit or a heat pump
and no field modification or special
unit is required for heat pump
applications.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the York YC090-300 and is the answer not in the manual?

Summary

Condensing Unit Features and Benefits

Air Handling Unit Features and Benefits

Electrical Requirements

Unit Controls

Physical Data

Condensing Unit Physical Data

Provides physical dimensions, weights, and component data for condensing units.

Indoor Unit Physical Data

Lists physical data for indoor units, including dimensions and coil details.

Unit Limitations

Condenser Unit limitations

Specifies operating limits for condenser units based on voltage and temperature.

Air Handling Unit Limitations

Details operational limitations for air handling units based on voltage and CFM.

Cooling and Heating Ratings

System Cooling and Heating Ratings

Provides system cooling and heating capacities, EER, IEER, and rated airflow.

Capacity Performance

Condenser and Air Handling Cooling Capacities

Presents detailed cooling capacity performance data for specific unit combinations.

Condenser Only Cooling Capacities

Condenser Only Ratings

Details the cooling capacities of condenser units at various conditions.

Heat Pump and Air Handler Cooling Capacities

PC090; NC090; NL090 Cooling Capacities

Presents cooling capacity data for PC/NC/NL090 units under different conditions.

PC120;NC120;NL120 Cooling Capacities

Provides cooling capacity data for PC/NC/NL120 units under various conditions.

PC180;NC180;NL180 Cooling Capacities

Presents cooling capacity data for PC/NC/NL180 units across different conditions.

PD180;ND180;NM180 Cooling Capacities

Details cooling capacity performance for PD/ND/NM180 units at various conditions.

PD240;ND240;NM240 Cooling Capacities

Provides cooling capacity data for PD/ND/NM240 units under different operating conditions.

Airflow Performance

CFM Static Pressure and Power-Altitude and Temperature Corrections

Sound Performance

Electrical Data

Typical Wiring Diagrams

Weights And Dimensions

Piping, Electrical Connections & Clearances

Summary

Condensing Unit Features and Benefits

Air Handling Unit Features and Benefits

Electrical Requirements

Unit Controls

Physical Data

Condensing Unit Physical Data

Provides physical dimensions, weights, and component data for condensing units.

Indoor Unit Physical Data

Lists physical data for indoor units, including dimensions and coil details.

Unit Limitations

Condenser Unit limitations

Specifies operating limits for condenser units based on voltage and temperature.

Air Handling Unit Limitations

Details operational limitations for air handling units based on voltage and CFM.

Cooling and Heating Ratings

System Cooling and Heating Ratings

Provides system cooling and heating capacities, EER, IEER, and rated airflow.

Capacity Performance

Condenser and Air Handling Cooling Capacities

Presents detailed cooling capacity performance data for specific unit combinations.

Condenser Only Cooling Capacities

Condenser Only Ratings

Details the cooling capacities of condenser units at various conditions.

Heat Pump and Air Handler Cooling Capacities

PC090; NC090; NL090 Cooling Capacities

Presents cooling capacity data for PC/NC/NL090 units under different conditions.

PC120;NC120;NL120 Cooling Capacities

Provides cooling capacity data for PC/NC/NL120 units under various conditions.

PC180;NC180;NL180 Cooling Capacities

Presents cooling capacity data for PC/NC/NL180 units across different conditions.

PD180;ND180;NM180 Cooling Capacities

Details cooling capacity performance for PD/ND/NM180 units at various conditions.

PD240;ND240;NM240 Cooling Capacities

Provides cooling capacity data for PD/ND/NM240 units under different operating conditions.

Airflow Performance

CFM Static Pressure and Power-Altitude and Temperature Corrections

Sound Performance

Electrical Data

Typical Wiring Diagrams

Weights And Dimensions

Piping, Electrical Connections & Clearances

York YC090-300 Specifications

General IconGeneral
BrandYork
ModelYC090-300
CategoryAir Handlers
LanguageEnglish

Related product manuals