88 YORK INTERNATIONAL
FORM 201.18-NM1 (102)
LD04033
WEIGHT DISTRIBUTION AND ISOLATOR MOUNTING POSITIONS
29517A
TYPE R OR RD
IF BOLTING IS PREFERRED–
Type R or RD mountings
are furnished with a tapped
hole in the center. This
enables the equipment to be
bolted securely to the
mounting.
TYPE R OR RD
NO BOLTING IS
PREFERRED–
Type R or RD mountings
are may be used without
bolting under machines
having no lateral or
severe vertical motion.
NEW DESIGN FOR TYPE RD-4
NEOPRENE MOUNTINGS.
TYPE RD-3
LD04033
Aluminum Fin and Black Fin Condenser Coils
29518A
DEFLECTION
COLOR MAX. LOAD
ins. (mm)
TYPE
CODE
lbs. (kg) R RD
R-3
BLACK 250 (113.5)
0.25 0.50
OR
RED 525 (238.3)
(6.3) (12.7)
RD-3
GREEN 750 (340.5)
GRAY 1100 (499.4)
R-4
BLACK 1500 (681.0)
0.25 0.50
OR
RED 2250 (1021.5)
(6.3) (12.7)
RD-4
GREEN 3000 (1362.0)
GRAY 4000 (1816.0)
TYPE L W H *HD ABCDE
R-3
5-1/2" 3-3/8" 1-3/4" 2-7/8" 2-1/2" 1/2" 4-1/8" 9/16" 1/4"
OR
(139.7) (85.8) (44.4) (73.2) (63.5) (12.7) (104.8) (14.4) (6.3)
RD-3
R-4
6-1/4" 4-5/8" 1-5/8" 2-3/4" 3" 1/2" 5" 9/16" 3/8"
OR
(158.7)(117.6) (41.4) (69.8) (76.2) (12.7) (127.0) (14.4) (9.6)
RD-4
DIMENSIONS: ins. (mm)
* HD dimension applies to double deflection Type RD mountings only.
Technical Data
To Next Page
Loading...
