94 YORK INTERNATIONAL
FORM 201.18-NM1 (102)
COMPRESSOR COMPONENTS – CONT’D
FIG. 42 – COMPRESSOR COMPONENTS
LD03669
COMPRESSOR NOMENCLATURE AND NAMEPLATE ENGINEERING DATA
DXS 36 L A R A 46 E
Type of YORK
Semi-Hermetic Twin
Screw Compressor
Diameter of Male Rotor
45 = 145.3 mm
36 = 136.4 mm
24 = 124.0 mm
12 = 112.0 mm
Compressor Rotor Length
L = Length L/D
S = Short L/D
Design Series
Motor Vendor
R = 2-Pole Reliance
S = 2-Pole A.O. Smith
T = 4-Pole Reliance
Motor Stack & Diameter Code
A = 10-1/8 Dia. x 10.75 Stack
B, C, etc. = TBA
Economizer Utilization
E = Economized
N = Non-economized
Voltage and Frequency
17 = 200-3-60
28 = 230-3-60
40 = 380-3-60
46 = 460-3-60
50 = 380/415-3-50
58 = 575-3-60
COMPRESSOR WEIGHTS
mm SIZE WEIGHT (LBS)* Kg
145 1310 594
136 1250 567
124 1175 533
112 760 345
* LESS SERVICE VALUES
• Compressor Isolator Pad Kit
(Reduces sound and vibration)
475-37815-000 one per each compressor
(Became standard mid-2000)
Note:
Compressor feet hold-down bolts, tightened from the under-
side of the frame rails, must be removed when the isolator pad
kit is installed.
Technical Data
To Next Page
Loading...
