Specification
TECHNICAL SPECIFICATIONS-OTHERS
Refrigerant
circuit
Refrigerant type R410A
Refrigerant charge KG 1.77
Maximum allowable distance
between indoor an outdoor
m 25
Maximum allowable level difference m 15
Refrigerant control Capillary
Piping connections
(external diameter)
liquid mm
gas mm
drain mm
Heat insulation type Both liquid and Gas pipes
Max. piping Length m
Max. Level Difference m 15
Chargeless m
Amount of Additional Charge of Refrigerant g/m
Note: the data are based on the conditions shown in the table below
htgnelgnipiPgnitaehgnilooc
Indoor: WB
Outdoor: WB
3 Sensors list
type Description Qty
1itcetedrofdesustIrosnestneibmAedisroodtuofoerutarepmetgn
Suction sensor
Its used for detecting suction pipe temperature of compressor to
adjust gas flowing
1
Conversation formulae
Kcal/h= KW
Btu/h=
cfm=m³
International Protection degree
IP24
7
25
7
20
15.88
Indoor:20 DB
Outdoor: 7 DB/6 WB
To Next Page
Loading...
