York YHJD18 THRU 60 User Manual

TECHNICAL GUIDE
SPLIT-SYSTEM HEAT PUMPS
13 SEER – R-410A – Single Phase
MODELS:
YHJD18 THRU 60
(1.5 THRU 5 NOMINAL TONS)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
10-year limited compressor warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
®
571209-YTG-B-1211
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
• Quality Condenser Coils - The coil is constructed of copper
tubing and enhanced aluminum fins for increased efficiency
and corrosion protection.
• Protected Compressor - The compressor is internally pro-
tected against high pressure, temperature, and externally by
a factory installed high pressure switch. This is accomplished
by the simultaneous operation of high pressure relief valve
and a temperature sensor which protects the compressor if
undesirable operating conditions occur. A liquid line filter-
drier further protects the compressor.
• Durable Finish - The cabinet is made of pre-painted steel.
The pre-treated galvanized steel provides a better paint-to-
steel bond, which resists corrosion and rust creep. Special
primer formulas and matted-textured finish insure less fading
when exposed to sunlight.
• Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections.
Available in sweat connect models only. The unit contains
enough refrigerant for matching indoor coils and 15 feet of
interconnecting piping. The small base dimension means
less space is required on the ground or roof.
• Top Discharge - The warm air from the top mounted fan is
blown up, away from the structure and any landscaping. This
allows compact location on multi-unit applications.
• Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the rippled fins of the condenser
coil muffle the normal fan motor and compressor operating
sounds.
• Low Maintenance - Long life permanently lubricated motor-
bearings need no annual servicing.
• Easy Service Access - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
• Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
• Agency Listed - U.L. and C.U.L. listed - approved for out-
door application. The unit is certified in accordance with the
Unitary Small Equipment certification program, which is
based on AHRI Standard 210/240.

York YHJD18 THRU 60 Specifications

General

Brand	York
Model	YHJD18 THRU 60
Category	Air Conditioner
Language	English

Summary

Technical Guide and System Description

System Overview

Details the 13 SEER Series outdoor unit, its components, and applications.

Key Product Features

Highlights essential features like quality coils, protected compressor, durable finish, and ease of use.

Physical and Electrical Data

Unit Specifications and Dimensions

Provides detailed physical dimensions, electrical ratings, and component specifications for various models.

Refrigerant Service Valve Sizes

Details the service valve sizes for liquid and vapor connections across different unit models.

System Charge Requirements

Refrigerant Charge for Matched Systems

Lists required TXV and additional refrigerant charge for matched indoor coil and outdoor unit combinations.

Cooling Capacity with Air Handlers

Performance Data by Air Handler Coil

Presents cooling performance data (CFM, MBH, SEER, EER) for various outdoor units paired with air handler coils.

Cooling Capacity with Furnaces

Performance Data for Furnace/Coil Pairs

Details cooling performance metrics (CFM, MBH, SEER, EER) for systems using furnaces and specific coils.

Cooling Capacity with High Efficiency Furnaces

HEFM Cooling Performance

Details cooling performance (CFM, MBH, SEER, EER) for high efficiency motor furnace and coil pairings.

Heating Capacity with Air Handlers

Performance Data by Air Handler Coil

Presents heating performance (MBH, COP, KW, HSPF) for units with air handlers and various coils.

Heating Capacity with Furnaces

Performance Data for Furnace/Coil Pairs

Details heating performance (MBH, COP, KW, HSPF) for furnace and coil combinations.

Heating Capacity with High Efficiency Furnaces

HEFM Heating Performance

Provides heating performance metrics (MBH, COP, KW, HSPF) for High Efficiency Motor Furnaces.

System Accessories

Available System Accessories

Lists optional accessories like Start Assist Kit, Blower Time Delay, and Thermostats for enhanced operation.

Sound Power Level Data

Octave Band Spectrum Analysis

Presents sound power levels in typical octave bands for cooling and heating modes by unit size.

Installation and Wiring

Clearance and Wiring Diagrams

Illustrates typical installation clearances, outdoor unit wiring, and indoor/outdoor unit connections.

Cooling Performance Data (YHJD18S41S2)

YHJD18S41S2 Unit and Coil Combinations

Provides cooling performance data (MBH, COP, KW) for various indoor coils matched with YHJD18S41S2.

Heating Performance Data (YHJD18S41S2)

YHJD18S41S2 System Performance

Lists heating performance (MBH, COP, KW) for YHJD18S41S2 paired with various indoor coils/furnaces.