To Next PageTo Next PageWhat to do if my York YHKMXH024BARX-FX display panel is not working?
If there is no display on the operation panel, you can try the following: * Replace the display panel and check if the unit works again. * Check the terminal block and the power supply circuit. * If the PCB is faulty, replace it.
What to do if my York Air Conditioner shows sensor failure?
If your air conditioner indicates a sensor failure, you can try the following steps: 1. Refix the sensor and check again. 2. Replace the sensor and check again. 3. Replace the PCB and check again.
General| Phase | 1 |
|---|---|
| Refrigerant | R-410A |
| Cooling Capacity | 24000 BTU/h |
| HSPF Rating | 9.0 |
| Voltage | 208/230V |
| Heating Capacity | 24000 BTU/hr |
| Energy Efficiency Ratio (EER) | 12.0 |
| Power Supply | 208/230V, 1 Phase, 60Hz |
| Operating Temperature (Cooling) | 64°F - 109°F |
Describes ease of installation and user-friendliness of the units.
Outlines the steps and procedures for installing the unit, covering placement and preparation.
Describes features of duct indoor units, such as 185mm thin design, silent operation, and multi-mode installation.
Shows photos and identification of indoor unit PCBs for various models.
