To Next PageTo Next Page
Need help?Do you have a question about the York YLAA0350HE and is the answer not in the manual?
Standards and codes YLAA chillers comply with for safety and quality.
Consequences of using equipment outside its intended purpose or design parameters.
Hazards of refrigerant vapor/liquid under pressure and need for trained personnel.
Safety precautions for electrical work, including grounding and isolation.
Items to check before placing units into operation, ensuring proper setup.
Site selection criteria and recommended clearances for outdoor chiller installation.
Information on field wiring requirements, including power and control wiring.
Key operational limits for temperatures and flows for various unit designations.
Absolute voltage limitations to prevent compressor damage.
Table detailing physical specifications for Standard Efficiency YLAA units.
Schematic diagrams illustrating the electrical wiring of the unit.
Diagram and notes specifying unit clearances required for optimal operation and maintenance.
Specifies that commissioning must be performed by authorized Johnson Controls personnel.
Procedures for calculating and verifying superheat and subcooling for system performance.
Instructions to perform leak checks on compressors, fittings, and piping.
Explanation of safety faults that cause system or unit shutdowns.
Enables user to enable/disable outputs, change configuration, and view inputs.
A table listing common problems, their causes, and solutions for troubleshooting.
General