F01 F 10 (R/W) 1 0 1 0
F02 U 48 (R/W) 3 0 1 1
F03 Minimum triac voltage F 49 (R/W) step F04 0 0 0
F04 Maximum triac voltage F 50 (R/W) step 100 F03 100 100
F05 F 24 (R/W) 80 -40 35 35
F06 F 26 (R/W) 50 0 10 10
F07 F 28 (R/W) 50 0 15 15
F08 Temperature minimum speed heating cycle F 30 (R/W) 80 -40 35 35
F09 Differential maximum speed heating cycle F 32 (R/W) 50 0 5 5
F10 Differential for fan heating cycle F 34 (R/W) F08 0 5 5
F11 Start time of fans F 51 (R/W) Sec. 120 0 0 0
F12 Duration triac impulse F 52 (R/W) Sec. 10 0 0 0
F13 F 53 (R/W) 2 0 0 0
Outlet, fans. 0 = absent, 1 = present
Operating mode.
0 = always ON (function not available)
1 = In parallel with compressor
2 = ON/OFF operation (function not available)
3 = In parallel with compressor and speed control (function
not available)
Fan control in defrost mode.
0 = fan deactivated
1 = fan activated in cooling cycle mode
2 = fan deactivated until defrost final temperature is reached
and start at maximum speed for d16
Temperature minimum speed cooling cycle
Temperature differential maximum speed cooling cycle
Differential fan OFF cooling cycle
°C
bar
°C
bar
°C
bar
°C
bar
°C
bar
°C
bar
Display Description
Parameters related to the fans
VS
Level Unit Max. Min.
Value
Pump Cool
To Next Page
Loading...
