Rigging
Figure 13: Rigging warning
WARNING
Rigging and lifting should only be done by a professional rigger in accordance with a written rigging
and lifting plan. The most appropriate rigging and lifting method depends on job specific factors, such
as the rigging equipment available and site needs. A professional rigger must determine the rigging
and lifting method to be used. It is beyond the scope of this manual to specify rigging and lifting
details.
Scope
This following section covers the rigging, locating, and final assembly of the YVAM units. It is
intended for use by the qualified field service teams.
WARNING
The unit must only be lifted by the base frame at the points provided. Never move the unit on rollers,
or lift the unit using a forklift truck. Care must be taken to avoid damaging the condenser cooling fins
when moving the unit.
17YVAM Air-Cooled Centrifugal Liquid Chiller
To Next Page
Loading...
