Need help?Do you have a question about the YORKVILLE SR300 and is the answer not in the manual?
General| Type | Solid State |
|---|---|
| Input Sensitivity | 1.4V |
| Frequency Response | 20Hz - 20kHz |
| Frequency Response Tolerance | +/- 0.5dB |
| THD | < 0.1% |
| Signal to Noise Ratio | > 100 dB |
| Connectors (Inputs) | XLR, 1/4" TRS |
| Connectors (Outputs) | Binding posts, Speakon |
| Weight | 22 lbs |
| Power Output (8 Ohms) | 150W |
| Input Impedance | 20k Ohms |
| Cooling | Internal Fan |
| Protection | Thermal, Short Circuit, DC |
| Dimensions | 19" x 3.5" x 12" |
| Damping Factor | >200 |
Covers essential safety warnings, proper handling, and servicing guidelines for the unit.
Details the SR300 amplifier's design, manufacturing process, and intended applications.
Explains using balanced 1/4" TRS inputs for noise-free operation and hum rejection.
Describes connecting unbalanced sources, noting the loss of balanced connection benefits.
Instructions for operating the amplifier in mono mode using either input channel.
Details the amplifier's protection against continuous short circuits and its operational limits.
Explains the unit's thermal protection and the need for adequate ventilation during high-output use.
Explains the function of CLIP, SIGNAL, and LIMITER LEDs on the front panel.
Details the subsonic filter's function, frequency response, and recommendation for use.
To Next Page
