Need help?Do you have a question about the YSI MultiLab 4010-1W and is the answer not in the manual?
General| Measurement Parameters | pH, mV, Conductivity, Dissolved Oxygen, Temperature |
|---|---|
| Channels | 1 |
| pH Range | 0 to 14 |
| pH Resolution | 0.01 |
| mV Resolution | 0.1 mV |
| Temperature Resolution | 0.1 °C |
| Display | LCD |
| Connectivity | USB |
| Type | Multi-parameter meter |
| mV Range | ± 2000 mV |
| Dissolved Oxygen Range | 0 to 20 mg/L |
| Temperature Range | -5 to 105 °C |
| Power Supply | Battery or AC adapter |
Details the function of each key on the meter, including softkeys and navigation controls.
Explains the information shown on the meter's display, including status, values, and symbols.
Identifies the various jacks and interfaces on the meter, such as sensor and USB ports.
Provides essential steps for initial setup, including battery insertion and powering on the device.
Lists contact phone numbers, email, website, and service details for technical assistance.
To Next Page
