- 17 -
Note : VERY IMPORTANT!!
If you cannot find the signal in the appendix of signal of your IC board,
LCD monitor also can be used. However, you have to choose SELECT
GAME CHANNEL “0” to adjust the required items to make the display
to be the best.
3.
How to adjust “SELECT GAME CHANNEL”?
First, choose “SELECT GAME CHANNEL” this item and press
“MENU/ENTER”. There will be a light bar which is red under the OSD. Next,
press “＋”/ “－” to the number ( refer to the appendix of signal and find the one
you are looking for). Then, press “MENU / ENTER” and light bar will become
white. After that, choose “RETURN” (back to the previous menu) then “EXIT”,
“POWER OFF” and “POWER ON”. The user can get the well-adjusted display.
4. Our company has collected lots of IC board signals (refer to the appendix of
signal) which has done and stored the value of the signals. When the user refers
to the appendix of the name of the IC board and finds the one you are looking
for. Next, choose the number of SELECT GAME CHANNEL (refer to How to
adjust “SELECT GAME CHANNEL”?) After that, choose “RETURN” (back to
the previous menu) then “EXIT”, “POWER OFF” and “POWER ON”. The user
can get the well-adjusted display. However, if the user presses “RECALL” or
“AUTO ADJUST” misadvisedly and makes the display distorted, please just
restart then the user can return to the well-adjusted display. Besides, if the user
chooses the built-in default value and the display is still not perfect, please
check the number of the name of IC board is correct or not. (refer to How to
adjust “SELECT GAME CHANNEL”?) Moreover, if the display is still not
perfect, please choose the number of SELECT GAME CHANNEL “0”. Next,
power on the IC board and LCD monitor at the same time. After that, refer to
How to use “DISPLAY ADJUST”? In the “DISPLAY ADJUST” this item, the
user can adjust the required items to make the display to be the best.
※ In order to provide the convenient operation for the user, our company will keep
on updating the built-in IC board signal and the appendix of the IC board signal.
However, if you have any special IC boards which spend you lots of time on
adjusting, you could provide it to us. We will store the value of the signal into the
memory and build up a number in “SELECT GAME CHANNEL”. It won’t
influence other signals.
To Previous Page
Loading...
General