Start measuring
3. Take off the cuff
4. Shut down
Press the " " button to shut down. Also it will power off automatically in 3
minutes without any operation.
5. Power off
Unplug the adapter to safely disconnect it from mains.
Do not position the device to make it difficult for safely disconnection from
supply mains.
Start measuring
Emergency stop during measurement
If the measurement need stopping for uncomfortableness or
other reasons, please press the " " button, the measurement
will stop immediately and air releases fast. Take off the cuff
manually if the " "button is not working.
Warning: Upper limit pressure of air inflation is
300mmHg/40.0kPa. Don't keep the inflated state for a
long time to avoid damage
To Next Page
Loading...
Need help?
General
