Yuwell YE660D User Manual

Common fault and trouble shooting
The table below shows the possible fault displaying icon, possible reason,
and solutions.
Wrong
indication
Fault cause
Solution
Err4
Unable to measure
pressure
Fasten cuff correctly
before measurement
Err5
Pressurizing error
Check if there is air
leakage from the cuff
Err6
Pressurizing error
caused by arm or body
motion
Keep arm and body still
and measure again
Err7
Cuff is too lose or fall off
Fasten cuff tightly
Err8
Pressure exceeds the
maximum value
(300mmHg)
Measure again please
Showing low
voltage icon
“ ”
Battery is low
Replace new batteries
Showing the
“ ” icon
Battery is running out
Replace new batteries
Warning: If the situations cannot be solved or unexpected problem
happens, please consult the local distributor.
Features and technical Parameters
 Model YE660D
 Display LCD digital display
 Measuring Oscillation mensuration method
 Measuring range
Pressure 0-300mmHg
Diastolic 20-210mmHg
Systolic 40-260mmHg
 Cuff Pressure 0-450mmHg
 Pulse rate 40-200 beats/min
 Precision Pressure:±3mmHg(±0.4kPa)
Pulse:±5% of reading value
 Electric =Class II(optional AC adapter)
classification =Type BF application part
 Power supply 4X1.5v AA batteries or 6V/ 600mA AC adapter
 Battery life 300 times
 Cuff size 22~45cm
 IP Classification IP21
 Service life 5 years or 50 thousand times
 Weight Approx 260g
 Dimension Approx 130x96x75(mm)
 Operating +5℃ to +40℃/15% to 90%
temperature RH (non-condensing) /Humidity
 Storage temper- -20℃ to +55℃/15% to 90%
ature/Humidity RH (non-condensing)

Yuwell YE660D Specifications

General

Brand	Yuwell
Model	YE660D
Category	Blood Pressure Monitor
Language	English