Memory function
press the both " " button and " "
button until the display shown as the
following picture, which means the recorded
data is cleared.
Press the " " button
to turn off the monitor
after deleting.
Note: This operation will delete all the
recorded data.
C. Read the recorded data by pressing the
" "button as the sequence: "1", "2"
......"60"(max). Then return to the 1st.
Holding the " " button to search the data
quickly.
D. Press the " " button to shut off the
monitor.
2. Delete the recorded data
28 29
The th data may be replaced by the th
when the memory capacity is full.The 1st data
may be replaced by the new data.
60 59
1. Press the " "button for the records.
A. Press the" "button to show the average
value of the latest 3 times measurement.
B. Repress the" "button to display the 1st
group of memory, the serial number is
displayed as "1" to "60". "1" is the latest group
and the "60" is the earliest one.
The average value The 1st group of memory
Tips!
Memory function
YE670D( )
尺寸：180X142.5mm 色彩：准确、单色，层次分明
纸张：105克双铜纸 印后加工：对折装订
CE认证 电子血压计说明书印刷要求
To Next Page
